FallTech WeldTech 7039, Nomex/Kevlar Blend Full Body Harness, 3 D-Rings

A full body harness you can trust when welding at heights. The webbing of this harness is manufactured from an OSHA and ANSI approved Nomex/Kevlar blend that exhibit flame and char resistant properties. The 7039 features 3 alloy steel D-rings and alloy steel buckles and adjusters. Those are expected features you bet your life on when welding up high. 

Features

• Flame and char-resistant Nomex®/Kevlar® blend webbing
• Twin torso keepers for stowing idle lanyard connectors
• Paired friction roller adjusters on front torso
• Label covers
• Load impact indicators

This harness allow for adjustment at 5 points on the harness.

• 1 Adjuster across the chest to allow a better lateral fit
• 2 Adjusters at the midsection to allow a snug shoulder to leg fit
• 2 Quick connect buckle and adjustments around the thighs.

Material Specifications

• Webbing: Nomex/Kevlar blend; Min. 5,000 lbs. tensile strength
• D‐Rings: Alloy Steel; Min. 5,000 lbs. tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs. tensile strength

Performance Specifications

• Tensile Strength: Min. 5,000 lbs.
• Max. Capacity: 425 lbs. 

Relevant Standards

• OSHA: CFR1926.502, CFR1910.66
• ANSI: A10.32‐2004, Z359.1‐2007, Z359.12‐2009

Warnings

• Read, understand and follow all labels and instructions prior to use.
• Inspect before each use.
• Remove from service if there is evidence of damage or excessive wear.
• Never attach a Shock Absorbing Lanyard to the front or side D‐Rings.